Home » Areas » Business Bay » 3d Signage Business Bay Dubai
Bab Al Mashriq fabricates 3D signage for Business Bay businesses, including built-up letters and logos in stainless steel, brass, aluminium and acrylic, lit or non-lit, for lobbies and facades. A small 3D logo starts from about AED 950, and standard signs are ready 3 to 7 working days after you approve the design.
Every letter is cut, formed and wired in our own workshop, so we control the finish, the depth and the timeline.
Part of our Business Bay signage service.
We fabricate six kinds of 3D signs for Business Bay clients, whether you need 3D logo signs for a lobby or large letters for a facade.
Cast acrylic letters in any brand colour. Light, affordable and easy to light from inside.
Grade 304 for interiors and 316 for exteriors, in brushed, mirror or painted finishes. 316 resists the humid air near the canal.
Solid brass or gold-finish letters for a premium lobby or reception.
Light, rigid letters painted in any colour. A good choice for large letters on podium fascias.
Front-lit letters glow through the face; halo-lit letters throw light onto the wall behind. Both use LED modules.
A warm, lower-cost option for interiors only, such as cafés and creative offices.
We also make 3D signage in Dubai for businesses outside Business Bay.
3D signage in Business Bay costs from about AED 950 for a small logo sign to AED 20,000 to 50,000 or more for a large lit building sign.
| 3D sign | Indicative price (AED) |
|---|---|
| Acrylic 3D letters, non-lit | 150 to 400 per sq ft |
| Front-lit LED letters | 300 to 800 per sq ft |
| Halo-lit letters | 400 to 900 per sq ft |
| Small reception 3D logo | From about 500 to 950 |
| Large illuminated building sign | 20,000 to 50,000+ |
These are planning ranges, not a quote. The exact price comes after the free site survey, once we know the size, the material and where the sign will be fixed.
Material, letter height, return depth and lighting set the price of 3D letters.
| Price factor | What it means |
|---|---|
| Material | Brass and stainless steel cost more to cut, weld and polish than acrylic or aluminium. |
| Height and number of letters | Taller letters and longer names use more material and labour. |
| Return depth | The return is the side of the letter. Deeper returns look bolder and cost more. |
| Lighting | Front-lit and halo-lit letters add LED modules, a driver and wiring. |
| Mounting and access | Studs, standoffs or a rail, and how high the sign goes, change the install time. |
Yes for exteriors and premium lobbies, because 316 stainless resists Business Bay’s heat and humidity; acrylic is better when you need colour, lighting or a lower budget. For budget-friendly acrylic signs, see acrylic signage in Business Bay.
3D signage is lettering or a logo built with physical depth, so it stands off the wall instead of being printed flat. Each letter is cut from sheet material, given a side wall (the return) and assembled, then painted, polished or lit.
In Business Bay, 3D signs go in two places: tower lobbies and office receptions inside, and podium fascias or facades outside, and each needs different materials and approvals.
Brushed or mirror finishes, halo-lit on cladding. Building approval only.
316 stainless or powder-coated aluminium, sealed LEDs, structural fixing and a Dubai Municipality permit.
| What changes | Inside a lobby | Outside on a facade |
|---|---|---|
| Material | 304 stainless, brass or acrylic | 316 stainless or powder-coated aluminium |
| Lighting | Halo-lit on dark cladding | Sealed, outdoor-rated LEDs |
| Fixing | Studs or standoffs into the wall | Structural fixing rated for wind load |
| Approval | Building management, if any | Landlord NOC and Dubai Municipality permit |
For the full reception setup, see reception signage in Business Bay.
Every 3D sign goes through five stages in our Ajman workshop.
You approve a scaled drawing with sizes, materials and colours.
We cut each letter face by CNC router or laser.
We form the returns and assemble each letter.
We fit LEDs where needed and test every letter before it leaves the workshop.
We use a full-size paper template on site, so every letter goes in the right place.
Standard 3D signs take 3 to 7 working days after design approval; large lit building signs take 2 to 4 weeks, plus permits for exteriors.
A 3D sign inside your office needs only building approval, if any; a 3D sign outside needs a landlord NOC and a Dubai Municipality permit. Our guide to signage approval in Dubai explains the steps.
| Work | Approval? | Issued by |
|---|---|---|
| Lobby or reception 3D logo | Tower rules (check per tower) | Building management |
| Podium or fascia letters | Yes | Landlord NOC, then Dubai Municipality |
| Lit exterior letters | Yes | As above, plus DEWA sign-off for the electrics |
3D letters work best where people see them from an angle, like reception walls and shopfronts, because the depth catches the light. For podium and facade signs, see outdoor signage in Business Bay.
We also install 3D signs in DIFC, Downtown Dubai and Dubai Marina.
Yes. We cut, form, paint and wire every 3D sign at our workshop in Ajman Industrial 2.
Most indoor letters are 10 to 25 mm deep. Outdoor and lit letters are usually deeper, so they read from further away and have room for the LEDs.
Yes. A timer switches the lights on and off at set times.
Wipe them with a soft cloth and mild soapy water, following the grain on brushed finishes. Avoid abrasive pads and bleach.
Send us your logo, where the sign will go and your target date. We will come back with material options and a price for your 3D signage in Business Bay, and book a free site survey.
Call or WhatsApp +971 55 397 5597 or use our contact form.