Reception signage · Business Bay

Office reception signage in Business Bay, ready before your move-in

Bab Al Mashriq makes reception signage for Business Bay offices, including 3D logo walls, lit letters and acrylic panels. We fabricate every sign in our own workshop and have it ready 3 to 7 working days after you approve the design. Installation can happen after office hours, and the site survey is free.

If you are moving into a new floor or rebranding, the reception sign is usually the last thing finished and the first thing clients see. We plan it around your move-in date, not the other way round.

Part of our Business Bay signage service.

reception signage dubai
Sign types

Office reception signs we make for Business Bay offices

We make six kinds of office reception signage for Business Bay offices. The right one depends on your wall, your lighting and how your brand should feel when the lift doors open.

3D acrylic letters

Cut from cast acrylic and built up to 10 to 25 mm deep. They take any brand colour and suit most budgets. This is the most common type of 3D reception signage we fit in Business Bay.

Brushed stainless steel or brass letters

Grade 304 stainless or brass gives a heavier, premium look. Popular with law firms, finance companies and real estate offices.

Halo-lit and backlit logo walls

LEDs behind the letters throw a soft glow onto the wall. They work best on dark cladding or timber panels, which many Grade-A fit-outs already have.

Acrylic standoff panels

A printed or cut acrylic panel held off the wall with metal standoffs. Quick to make and easy to remove, so they suit serviced offices and short leases.

Wood or veneer logo walls

Timber slats or veneer panels with letters fixed on top. A warmer look for creative agencies and hospitality offices.

Digital reception displays

A screen behind the desk for welcome messages and brand video, for companies that want content they can change.

We also make reception signage in Dubai for offices outside Business Bay, using the same workshop and materials.

Pricing

How much does reception signage cost in Business Bay?

Reception signage in Business Bay costs from about AED 500 for a small non-lit acrylic logo to AED 3,000 to 15,000 or more for a large lit logo wall.

Reception signIndicative range (AED)
Small non-lit acrylic logoFrom about 500
Large lit logo wall3,000 to 15,000 or more

These are planning ranges, not a quote. The exact price comes after the free site survey, once we know the wall size and how the sign will be fixed. In Business Bay towers, after-hours installation and building deposits can add to the cost, and we show them as separate lines so you can see where the money goes.

What changes the price of a reception sign?

Size, material, lighting and the wall the sign fixes to set the price.

Price factorWhat it means
Letter height and depthA 1,500 mm logo with 25 mm deep letters uses far more material than a 600 mm logo cut from 5 mm acrylic.
Metal or acrylicStainless steel and brass cost more to cut, weld and polish than acrylic.
Lit or non-litLighting adds LED modules, a driver (the small power unit) and wiring time.
Wall typeGlass partitions need standoffs or a clear backing panel. Gypsum walls sometimes need a timber or metal plate behind them to hold the weight.
Access and timingHigh walls, after-hours work and service-lift bookings add labour.

Is a lit reception sign worth it in a Business Bay office?

Yes, if your reception wall sits in a dim area or can be seen from the lift lobby through glass. No, if it faces large windows and gets strong daylight, because the light will barely show. A halo-lit sign looks best on darker walls. A front-lit sign is brighter and easier to read from a distance. Both run on low-voltage 12V LEDs and need a power point behind or near the wall, which we check during the survey.

How big should a reception logo be?

The right size depends on how far visitors stand from the wall and how wide the wall is. Measure the distance from the entrance door to the wall, then size the logo so it reads clearly from there without filling the whole wall. Leave clear space above and below the logo so it does not crowd the ceiling or the reception desk. We show you two or three sizes on a photo of your wall before you decide.

Tower rules

Reception signs in Business Bay towers: shared lobbies vs private floors

In Business Bay towers the ground-floor lobby belongs to the building, so a tenant’s logo there usually goes on the shared directory board. The reception on your own floor is yours to brand. Knowing which is which saves you from designing a sign the building will refuse.

Ground-floor lobby

Belongs to the building. Your logo goes on the shared directory board.

Your own floor

The reception is yours to brand.

A few things we check in every Business Bay tower before we design:

What we checkWhy it matters
The building's fit-out rulesSome towers limit what can be seen from the lift lobby through your glass entrance, or ask for drawings before any drilling.
The wall itselfMany Business Bay offices have full-height glass partitions at the entrance. A sign on glass needs standoffs, a clear acrylic backer or vinyl, not screws into the glass.
Drilling hoursMost towers do not allow noisy work during office hours. We install in the evening or at weekends.
The service liftLarge logo walls go up in the service lift, which has to be booked through building management.
DepositsSome buildings hold a refundable deposit until they inspect the finished work. We leave the wall and floor clean so you get it back.

If your company needs more than the reception sign, our office signage in Business Bay page covers door plates, glass manifestation and directories.

Process

How we make and install your reception sign

We take a reception sign from survey to installation in five steps.

1

Survey the wall.

We measure, check the lighting and find the nearest power point.

2

Mock up and colour-match.

You see the sign on a photo of your own wall at true scale. We match your brand colours to paint or acrylic samples you can hold.

3

Get building approval if needed.

If the sign is in a shared area, we send the drawings to building management.

4

Fabricate in our workshop.

We cut, build, paint and wire the sign in-house.

5

Install and clean up.

We fit the sign, often after hours, test the lights and leave the area clean.

How long does a reception sign take?

Most reception signs take 3 to 7 working days to fabricate after you approve the design, plus about a day to install. Large stainless steel or brass pieces take a little longer. If building management needs to approve the sign, allow a few extra days for their review.

Do you need approval for a reception sign in Business Bay?

A reception sign inside your own office usually needs no Dubai Municipality permit, but your building management may still need to approve it.

Our guide to signage approval in Dubai explains each authority if your sign falls outside your unit.

What else do Business Bay offices brand besides the reception?

Once the reception is done, most Business Bay offices add door plates, glass manifestation and a logo outside the unit. If you want deeper letters in metal for a lobby or shopfront, see 3D signage in Business Bay. For a lower-cost option for a serviced office suite, see acrylic signage in Business Bay.

Reception signage near Business Bay

We also install reception signs in Downtown Dubai and DIFC next door, and across the rest of Dubai. If your company has more than one office, we can match the reception signs across all of them.

Get your Business Bay reception sign quoted

Send us your logo, a photo of your reception wall and your move-in date. We will come back with sizes, materials and a price for your reception signage in Business Bay, and book a free site survey.

Call or WhatsApp +971 55 397 5597 or use our contact form.